Pulse pleated filter cartridge dust collector

Pulse pleated filter cartridge dust collectors are widely used in welding, casting, metal cutting, metal grinding, wood processing, papermaking, ceramics, tobacco, chemical industry, electronics, polishing, steel, electricity, material cutting and grinding, dye, grain and other chuck type pulse dust collectors.

Characteristics of pulse pleated filter cartridge dust collector:

1. Due to its core filtering element being a pleated filter cartridge dust collector, it saves space compared to a bag dust collector;

2. The design of the dust collector ensures low pressure loss and energy conservation;

3. Installation and maintenance do not require entering the body, reducing parking time;

4. Install a pressure regulating filter on the air bag to improve the quality of the injected gas.

Pulse pleated filter cartridge dust removal operation and instructions:

1. Before putting the equipment into use, it is necessary to check whether the fan on the equipment is running normally, and whether there is any abnormal noise or poor condition. Otherwise, it needs to be shut down for repair. Check if the electromagnetic pulse valve is working properly and if the compressed air is between 0.5 and 0.7 MPa. Otherwise, make adjustments.

2. Adjustment of pulse automatic cleaning. Read the instruction manual of the pulse controller carefully, adjust the pulse interval and pulse width. The adjustment of the pulse interval depends on the size of the dust volume. Generally, it can be set at around 10 seconds, and the pulse width can be set at around 0.1 seconds.

3. Dust stored in the ash collection bin should be cleaned regularly and regularly.

4. After the operation of the equipment, the dust collection effect of the equipment should be visually monitored. If obvious dust is found flying out of the clean air outlet, it indicates that the filter cartridge inside the dust collector is loose or damaged, and should be checked and replaced in a timely manner. The filter cartridge should be cleaned every six months. The cleaning method is to carefully remove the filter cartridge, rinse it with clean water, and let it dry. It should not collide with hard objects to prevent scratching the filter material and reducing the dust collection effect. The disassembly of the filter cartridge should be carried out according to the "replacement method".

5. Regular maintenance of equipment and normal operation.