MS type buried scraper conveyor

The MS type buried scraper conveyor is a continuous conveying equipment that uses a moving scraper chain to transport powder, small particles, small pieces and other loose materials in a closed rectangular cross-section shell. Because the scraper chain is completely buried in the material during transportation, it is called a "buried scraper conveyor".

The buried scraper conveyor has a simple structure, light weight, small volume, good sealing, and convenient installation and maintenance. It can not only transport horizontally but also tilt and vertically; Not only can it be transported alone, but it can also be arranged in combination and connected for transportation; It is possible to add and unload more materials, and the process layout is relatively flexible. Due to the enclosed shell, significant working conditions can be achieved during material transportation to prevent environmental pollution.

The MS type buried scraper conveyor is a universal buried scraper conveyor that can be widely used in sectors such as chemical industry, machinery, metallurgy, light industry, grain, medicine, transportation, power, etc. It is used to transport powdered, small particle, and small block materials.

The MS type buried scraper conveyor has the following requirements for the conveyed materials:

1. Material bulk density: γ=0.2~1.8t/m3;

2. Material temperature: t<100 ° C;

3. Moisture content: For general materials, it is not allowed to make them clumpy by hand and not easy to loosen; An increase in moisture content will increase adhesion and compaction, and it should not cause the material to adhere severely to the scraper.

4. Particle size: The particle size of a material is related to its hardness. If the particle size is too large, it is not suitable for transportation.

Characteristics of MS type buried scraper conveyor:

1. The MS type buried scraper conveyor is commonly used for horizontal conveying of particles and powdered materials, and can also be used for inclined conveying within a range of 150 ° angle;

2. The MS type buried scraper conveyor has the characteristics of complete machine, stable operation, small structural size, large conveying capacity, low energy consumption, and low material damage rate;

3. The MS type buried scraper conveyor has a reasonable structure and can be fed at multiple points. The movement speed of the scraper is driven by the reducer, and it runs smoothly with low noise. On the basis of single point feeding and discharging, it can also be fed and discharged at multiple points. It has outstanding characteristics in conveying toxic, explosive, high temperature, and easily flying materials, worker operating conditions, and reducing environmental pollution.