Manual sweeping machine

一、 The sweeper cannot operate

1. Damaged fuse, solution; Replace the fuse.

2. Insufficient battery power, solution: Charge in a timely manner.

3. In the parking brake state, the solution is to turn off the parking brake.

二、 The sweeper cannot clean it up

1. Wrap the main brush with a ribbon, and the solution is to remove the wound.

2. The triangular belt falls off, and the solution is to replace the triangular belt.

3. The main brush motor is damaged. Solution: Replace the main brush motor.

4. The fuse is damaged. Solution: Replace the fuse.

三、 Ground residue

1. The main brush pressure is too low. Solution: Adjust the main brush.

2. The cleaning speed is too fast. Solution: Slow down the cleaning speed.

3. The trash can is full, solution: take out the garbage.

四、 Excessive dust during cleaning

1. Filter blockage, solution: Turn on the dust switch.

2. The filter is damaged. Solution: Replace the filter.

五、 Unable to sprinkle water

1. The water tank is short of water. Solution: Add water in a timely manner.

2. nozzle blockage, solution: guide the nozzle.

3. The water pump and motor are damaged. Solution: Replace the water pump and motor.